Crowd Barrier Graphics

Product Description

Custom printed graphics designed to fit a standard Crowd Barrier:

• Either '2300mm' or '2500mm' barriers
• All-rounded corner barriers or top-only rounded corner barriers

Our crowd barrier graphics can be securely bungee or cable tied. Crowd Barrier Graphics are a fantastic opportunity to brand an otherwise pedestrian piece of hardware for maximum visibility at events.

Available in a variety of materials, fittings, sizes, and shapes. These graphics allow for cost-effective branding in crowd-controlled areas. Commonly used at locations such as:

• Festivals
• Construction and building sites
• Sporting events
• Street events
• Exhibitions
• Concert and music venues

Supplied on either Mesh PVC, Standard PVC, PVC-Free Mesh, PVC-Free Banner or Display Polyester.

Suitable for both outdoor and indoor use.

Graphics can be secured with bungee ball ties or cable ties. To best preserve the longevity of the graphics, we recommend securing them with bungee ball ties.

Crowd barrier hardware not included.

Barrier Sizes and Corners

'2300mm' vs '2500mm' Barriers

We provide graphics for both '2300mm' and '2500mm' types of barriers. Please check what type of barrier will be in use, and ensure the correct size is chosen when ordering.

'All-Rounded Corners' vs 'Top-Only Rounded Corners'

We provide graphics for both 'all-rounded corner' and 'top-only rounded corner' types of barriers. Please check what type of barrier will be used before ordering graphics to ensure the correct type is produced.

If you are unsure about fitting and are placing a larger order, we recommend ordering one graphic to start with, in order to test fitting before placing the rest of the order.

Single-Sided Mesh PVC & Standard PVC Graphics

Covering one side of a crowd barrier's infill bars and up to the exterior frame, these are a cost-effective way to adorn a plain crowd barrier.

'All Angled Corners' graphics are supplied with twelve eyelets. 'Top-Only Angled Corners' graphics are supplied with ten eyelets. This provides plenty of strength when fitted to a crowd barrier with bungee ball ties.

Sizing of the banners has been designed to sit just inside of the barrier frame, rather than attempting to cover it. This allows for neater securing with good tension, rather than puckered, protruding or loose edges.

Single-sided banner graphics are supplied at the following sizes with either four angled corners (for 'all-rounded corner' barriers) or two, top-only angled corners (for 'top-only rounded corner' barriers).

If desired, two single-sided graphics can be used on either side of a crowd barrier, but you may prefer to use our fold-over graphics for a more continuous and seamless look.

Double-Sided 'Fold-Over' Mesh PVC & Standard PVC Graphics

Covering both sides of a crowd barrier's infill bars and leaving a gap to the left and right, these are a cost-effective way to adorn a plain crowd barrier. Each graphic is made of one large banner that folds over the frame and can then be secured in place.

Fold-Over PVC graphics are supplied the following sizes and fit both 'all-rounded corner' and 'top-only rounded corner' barriers:

Fold-Over graphics are supplied with twelve eyelets, with each pair of eyelets designed to be secured to the frame together (e.g. each pair requires one bungee ball tie), meaning a total of six bungee ties is required per fold-over graphic.

Fabric Jackets

Made from Display Polyester, our Crowd Barrier Fabric Jackets are the ultimate and most professional way to cover and decorate crowd barriers. These jackets cover the barrier frame itself, maximising the design area and creating a more aesthetically-pleasing appearance.

Double-Sided

Double-Sided Fabric Jackets are made from a single piece of fabric, making them very strong. Frames are covered from view on both sides, apart from the feet and joining hooks.

Six plastic eyelets are provided on each side (12 total) around the bottom half of the graphic, which line up between both sides for perfect means of securing through from one side to the other, with your choice of tie.

Single-Sided

Single-Sided Fabric Jackets are made from a single piece of fabric, making them very strong. Frames are covered from view on the front side, apart from the feet and joining hooks. The graphic is held over the top of the frame with a 150mm-tall 'sock' (non-printed).

Six plastic eyelets are provided around the bottom half of the graphic, to secure with your choice of tie. Two additional eyelets are provided in the corners of the 'sock', allowing the graphic extra points to be secured down if needed/desired.